Decal Installation

First, thank you for your decal purchase. Your decal should be applied as soon as possible to prevent application issues. Please follow the applicable instructions below to install your car or wall decal.

Our “car decals” can be applied to almost any clean smooth surface such as a car, truck, boat, trailer, motorcycle, glass (mirror, windows, windshield, etc.), door, cup, water bottle, computer, helmets, skateboard bottom, boat, ATV, and more. If you plan to install a decal an a wall, we recommend asking for a “wall decal”.

Our “wall decals” are meant to be placed on a painted wall. The wall decal will be easier to remove in the future and should not damage the wall when the decal is removed.

Car Decal Installation

For best results, car decals should be applied only to surfaces with temperatures between 50-90 degrees Fahrenheit. After installation, the decal should be allowed to cure for 24 hours before getting wet. Your decal comes with transfer tape applied to help you easily install it.

What you will need:

  • Decal
  • Isopropyl (rubbing) alcohol
  • Paper towels
  • Old credit card or plastic gift card
  • If you are installing a large decal, it is helpful to have a second person to help you
  1. Clean the surface where you will apply the decal with rubbing alcohol and a paper towel. Allow it to dry.
  2. Lay the decal on a clean flat surface. Using the credit card, firmly rub over the decal from the center outwards from all directions.
  3. Beginning in a corner, peel the backing paper off of the transfer tape. Go slow and make sure all of the decal sticks to the transfer tape as it is pulled way from the backing paper.
  4. Place one side of the transfer tape onto the surface, and press it down with the credit card. Continue applying the decal in a rolling motion using the credit card to press it down as you go.
  5. Once the decal is placed, use the credit card and rub it firmly from the center point to the edges in all directions to remove air bubbles.
  6. Beginning in a corner, slowly peel away the transfer tape at a 45 degree angle. All that should remain now it just the vinyl decal. Enjoy your decal!

Wall Decal Installation

Note: Wall decals may not stick to all paint finishes, dirty or soiled walls, or highly textured walls.

What you will need:

  • Decal
  • Level
  • String
  • Old credit card or plastic gift card
  • Painters tape
  • Scissors
  • If you are installing a large decal, it is helpful to have a second person to help you
  1. Using your level and painters tape, tape a piece of string to the wall where you plan to install your wall decal.
  2. Lay the decal on a clean flat surface. Using the credit card, firmly rub over the decal from the center outwards from all directions.
  3. Place the decal between the wall and the string. The string help you make sure your decal is applied level on your wall. Tape the top corners of the decal to the wall using painters tape and place a vertical piece of tape across the middle of the decal.
  4. Remove the string and discard.
  5. Remove the painters tape from the top left corner, and peel the backing paper off of the transfer tape. The decal should stuck to the transfer tape. When you reach the center of the decal, cut the backing paper off using scissors.
  6. Using the credit card, firmly rub the decal from the center point outwards to apply the left side of the decal to the wall.
  7. Remove the painters tape from the center and right corner. Peel the backing paper off of the transfer tape. Using the credit card, firmly rub the decal from the center point outwards to apply the right side of the decal to the wall.
  8. Begin in a corner and slowly peel off the transfer tape at a 45 degree angle. Smooth the decal using the credit card to remove any air bubbles by rubbing from the center to the edges. All that should remain now it just the vinyl decal. Enjoy your decal!